SPECIAL PRICE - Switching actuator 2-gang, KNX
Zoom f088bb68c4585fed2ff9ec03970eee307fd355241f33101dad7edd4f92b5fd6e
GIRA 105700

SPECIAL PRICE - Switching actuator 2-gang, KNX

Product code: 105700
SPECIAL PRICE - The amount of stock listed is all we have of these items at this price, once these have run out, we will only be able to sell the item at is standard price. If you order more than is available, we will contact you to discuss the options for full priced items or alternatives. Two channel 6A switching actuator with two binary inputs for installation in a flush-mounted wall box such as the electronics box from Kaiser. Two zero-voltage contacts can be connected to the binary inputs which can carry out various functions or be blocked independently of each other in the process. The input "One" is assigned to the switching actuator at the factory, enabling operation without programming.
Price (Excluding VAT)
checking stock


The connection to 230 V is made via a flexible cable with a length of approx. 20 cm. The connection of the binary inputs and the EIB is made via a 6-wire connection cable, approx. 30 cm in length. The connection cable for the binary inputs can be extended to a maximum of 5 m.


  • Output can be configured as NO contact or NC contact
  • Selection of preferred position for bus voltage failure and return
  • Switch-on and/or switch-off delay or time-switch function can be set
  • Output with three objects: Switching, response and additional function (linking, block function or forced setting)
  • Response object can be inverted


  • Free assignment of the functions switching, dimming, blind and value transmitter to both inputs
  • Blocker for blocking individual inputs
  • Behaviour when the bus voltage returns can be configured separately for each input
  • Telegram rate limiting
  • Switching function: Two independent switching objects for each input present and can be enabled individually, command for rising or falling edge can be set independently (ON, OFF, SW, no reaction)
  • Dimming function: Single and double-surface operation, time between dimming and switching and dim-step size can be set, telegram repetition and stop-telegram transmission possible
  • Blind function: Command can be set with rising edge (no function, UP, DOWN, CHANGE), operating concept can be configured (Step - Move - Step or Move - Step), time between step and moving mode can be set, slat adjustment time can be set
  • Value transmitter and light scene auxiliary unit function: Edge (push button as NO contact, push button as NC contact, switch) and value with edge can be configured, value adjustment with push button by pressing and holding button for value transmitters possible, light scene auxiliary unit with memory function and saving of the scene without calling up previously is possible

Technical Details


  • Bus Voltage: KNX Bus 21...32VDC
  • Bus Current Consumption: 5mA @ 29VDC
  • Number of Outputs: 2 zero-voltage closing contacts (with common phase connection "L")
  • Load capacity: 230 VAC/6 A
  • Connected load: 1200 W light bulbs
  • Connected load: 1200 W HV halogen
  • Connected load: 500 VA LV halogen, wound transformer
  • Connected load: 500 W LV halogen, Gira Tronic transformer
  • Connected load: 60 A, max. 14uF capacitive load
  • Number of inputs: 2
  • Scanning Voltage: approx. ‰19 V DC referred to "com"; continuous signal
  • Loop Resistance: max. 2 kOhm for safe "1" signal detection (rising edge) 
  • Temperature range: -5 to +45 °C



Brand GIRA

Documents & Downloads

Look for similar items