Due to various circumstances outside our control, we are currently facing extended lead times on some products. 

Please be aware our daily cut-off to ship orders on a next-day service is now 1:45 pm. 

Our last shipping day of 2021 is December 23rd, we will resume shipping on January 4th.  

KNX heating actuator, 6-gang

KNX heating actuator, 6-gang

Product code: 2336REGHZHE
Switching of electrothermal actuators for heaters or cooling ceilings
Price (Excluding VAT)


Intended use

  • Switching of electrothermal actuators for heaters or cooling ceilings
  • Installation in distribution boxes on DIN rail according to EN 60715

Product characteristics

  • Switching operation or PWM operation
  • Actuators with characteristics opened or closed without power controllable
  • Valve drives for 230 V or 24 V controllable
  • Outputs can be operated manually, construction site mode
  • Feedback in manual mode and in bus mode
  • Disabling of individual outputs manually or via bus
  • Overload-protected, short circuit-protected; error indication with LED
  • Protection against jamming valves
  • Forced position
  • Various setpoints for forced position or emergency operation in case of bus failure for summer or winter
  • Cyclical monitoring of the input signals can be parameterised
  • Feedback via bus, e.g. in case of mains failure, overload or sensor failure

Technical Details


Rated voltage: AC 110 ... 230 V ~, 50/60 Hz
Stand-by power: max. 0.4 W
Power loss: max. 1 W
KNX medium: TP 256
Rated voltage KNX: DC 21 ... 32 V SELV
Power consumption KNX: max. 250 mW
Ambient temperature: −5 ... +45 °C
Storage/transport temperature: −25 ... +70 °C

Heating outputs
    Contact type: semiconductor (triac), ε
    Switching voltage: AC 24 / 230 V ~
    Mains frequency: 50/60 Hz
    Switching current: 5 ... 160 mA
    Switch-on current: max. 1.5 A (2 s)
    Switch-on current: max. 0.3 A (2 min)

Number of drives per output
    230 V drives: max. 4
    24 V drives: max. 2

Mounting width: 72 mm (4 rail units)

Connection, outputs
    Connection mode: screw terminals
    single wire: 1 x 0.5 ... 4 mm²
    stranded without ferrule: 1 x 0.5 ... 4 mm²
    stranded with ferrule: 1 x 0.5 ... 2.5 mm²



Technology KNX
Brand JUNG
Mounting DIN Rail
Outputs 6
Mounting Width 4MW

Documents & Downloads

Look for similar items