Due to various circumstances outside our control, we are currently facing extended lead times on some products. 

Please be aware our daily cut-off to ship orders on a next day service is now 1:45pm.

KNX LED universal dimming actuator / speed regulator, 1-gang
Zoom
JUNG 3901REGHE

KNX LED universal dimming actuator / speed regulator, 1-gang

Product code: 3901REGHE
Mains dimmer for a wide range of dimming types
Price (Excluding VAT)
£182.96

Description

Intended use

  • Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
  • Mounting on DIN rail according to EN 60715 in distribution boxes
  • Speed controller for regulating the speed of single-phase motors e.g. induction motors, shaded pole motors or universal motors

Product characteristics

  • Automatic or manual selection of the dimming principle suitable for the load
  • Protected against no-load, short-circuit and overheating
  • Signal in the event of a short-circuit
  • Outputs can be operated manually
  • Feedback of the switching position and the dimming value
  • Parameterisable switch-on and dimming behaviour
  • Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
  • Light scene operation
  • Disabling of individual outputs manually or by bus
  • Status indicator of the outputs via LED
  • Operating hours counter
  • Mains failure longer than approx. 5 seconds leads to switch-off of the dimmer actuator.
  • Depending on the parameter setting, the connected load is calibrated after resumption of power supply.
  • Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG)
  • Optional accessory: compensation module LED, ref.-no.: KM LED 230 U

Technical Details

Specification

Rated voltage: AC 110 ... 230 V ~, 50/60 Hz

Power loss: max. 4 W

Stand-by power: max. 0.5 W

Ambient temperature: _5 ... +45 ¡C

Storage/transport temperature: _25 ... +70 ¡C

Contact type: _, MOSFET

Motor loads

Motor switching current: 2.3 A

Lamp loads

Connected load, 230 V per output

  • Incandescent lamps: 20 ... 500 W
  • HV halogen lamps: 20 ... 500 W
  • Inductive transformers: 20 ... 500 VA
  • Inductive transformers with LV LED: 20 ... 100 VA
  • Electronic transformers: 20 ... 500 W
  • Electronic transformers with LV LED: 20 ... 100 W
  • Dimmable HV LED lamps: typical 3 ... 100 W
  • Dimmable compact fluorescent lamps: typical 3 ... 100 W

With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.

  • Ohmic-inductive: 20 ... 500 VA
  • Ohmic-capacitive: 20 ... 500 W
  • Capacitive-inductive: not permitted

Connected load, 110 V per output

  • Incandescent lamps: 20 ... 250 W
  • HV halogen lamps: 20 ... 250 W
  • Inductive transformers: 20 ... 250 VA
  • Inductive transformers with LV LED: 20 ... 50 VA
  • Electronic transformers: 20 ... 250 W
  • Electronic transformers with LV LED: 20 ... 50 VA
  • Dimmable HV LED lamps: typical 3 ... 50 W
  • Dimmable compact fluorescent lamps: typical 3 ... 50 W

With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.

  • Ohmic-inductive: 20 ... 250 VA
  • Ohmic-capacitive: 20 ... 250 W
  • Capacitive-inductive: not permitted

Connection

  • Connection mode: screw terminals
  • single wire: 0.5 ... 4 mm_
  • stranded without ferrule: 0.5 ... 4 mm_
  • stranded with ferrule: 0.5 ... 2.5 mm_

Mounting width: 72 mm (4 rail units)

Approvals: VDE

Properties

Properties

Technology KNX
Brand JUNG
Mounting DIN Rail
Operating voltage KNX Bus (29VDC)
Outputs 1
Mounting Width 4MW

Documents & Downloads

Look for similar items