Blind / Roller Shutter Actuator, 2-fold, 230 V AC, MDRC
The 2-fold Blind/Roller Shutter Actuator is used to control independent 230 V AC drives, for positioning blinds, roller shutters, awnings and other shading products via KNX. The device can also be used, for example, to control doors, windows and ventilation flaps.
The output contacts are mechanically interlocked, so that voltage cannot be applied to both contacts at the same time.
The device does not require an auxiliary voltage.
Individual outputs can be copied or exchanged to reduce the programming effort.
The Blind/Roller Shutter Actuator is a modular installation device for installation in the distribution board on 35 mm mounting rails. The connection to the KNX Bus is implemented via bus connection terminals.
- Bus Voltage: KNX Bus 21...32VDC
- Bus Current Consumption: Max 12mA
- Outputs Up/Down: 2 (2 AC Drives can be connected to each channel)
- Output Rated Voltage: 230 V AC (45...65 Hz)
- Output Rated Current: 6A
|Operating voltage||KNX Bus (29VDC)|
|EAN||40 16779 69848|