SA/S4.6.1.1 Switch Actuator, 4-fold, 6 A, MDRC -
Zoom f088bb68c4585fed2ff9ec03970eee307fd355241f33101dad7edd4f92b5fd6e
ABB SA/S4.6.1.1

SA/S4.6.1.1 Switch Actuator, 4-fold, 6 A, MDRC -

Product code: 2CDG110152R0011
Uses potential free contacts to switch 4 independent electrical loads via the KNX Bus. The 6A-AC3 device is especially suited to switch resistive, inductive or capacitive loads.
Price (Excluding VAT)
£171.77

Description

Switch Actuator SA/S 4.6.1.1 6 A  is modular installation devices in ProM design for installation in the distribution board. It is suitable for switching resistive, inductive and capacitive loads. The actuator can switch 4 independent electrical loads via floating contacts.

The outputs are connected using screw terminals with one terminal per output for the power feed. Each output is controlled separately via KNX.

The device does not require an additional power supply and is ready for immediate use after the bus voltage has been applied.

The Switch Actuator is parameterized via ETS. Connection to KNX is implemented using the bus connection terminal on the front.

The following functions can be set individually for each output: 

  • Time and ON/OFF delay functions
  • Staircase lighting function with warning and modifiable staircase lighting time
  • Recall of scenes/presets via 8/1 bit commands
  • Logical functions AND, OR, XOR, GATE function
  • Status messages
  • Forced operation and safety functions
  • Response to threshold values
  • Control of electro-thermal valve drives
  • Selection of the default state on bus voltage failure and recovery
  • Output inversion


Technical Details

Specification

  • Bus Voltage: KNX Bus 21...32VDC
  • Bus Current Consumption: Max 12mA
  • Outputs: 4
  • Output Rated Voltage: 250/440 V AC (50/60 Hz)
  • Output Rated Current: 6A Per Channel


Properties

Properties

Brand ABB
Technology KNX
Mounting DIN Rail
Operating voltage KNX Bus (29VDC)
Outputs 4
IP rating IP20
Mounting Width 4MW
EAN 40 16779 64384

Look for similar items