KNX-RF USB Interface
This device connects KNX RF devices on a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames and is compatible with the ETS¨ software ETS5 or higher.
The buttons on the front panel allow disabling the telegram filter for testing purposes.
The LEDs indicate operating conditions as well as communication errors on the KNX bus.
The power is supplied via the KNX bus (main line).
Power supply: < 50 mA
RF Interface: KNX RF, ISM Band 868,3 MHz, FSK/ Output power <10mW
Mechanical Data: Housing: Transparent plastic (ABS)
Dimensions: 71 x 23 x 8,7mm
Mounting: Use indoor areas only, it can be connected directly to a USB port of a PC or Laptop.
Connectors: Connector for KNX Bus, Internal antenna
Protection Degree: Ambient temp. operating: Ð 5 É + 45 ¡C, Ambient temp. non-op.: Ð 25 É + 70 ¡C, Rel. humidity (non-condensing): 5 % É 93 %
Security: Protection (acc. EN 60529): IP 20
According to the Standard:
- Low voltage directive 2014 / 35 / EU
- EMC directive 2014 / 30 / EU
- Radio equipment directive 2014 / 53 / EU
- RoHS directive 2011 / 65 / EU (RoHS2)
- EN 50491-3: 2009
- EN 50491-5-1: 2010
- EN 50491-5-2: 2010
- EN 50491-5-3: 2010
- EN 61000-6-2: 2005
- EN 61000-6-3: 2007 + A1: 2011
- EN 300 220-2: V3.1.1
- EN 50581: 2012 (RoHS2)