eNet Server
Description
Intended use
- Commissioning, diagnosis and maintenance of an eNet installation via PC, tablet and laptop
- Operation of an eNet installation via smartphone
- Radio receiver for eNet RMD modules
- Operation only with approved power supply
- Mounting on DIN rail according to EN 60715 in distribution boxes with power supply RMD (ref.-no. NT 1220 REG VDC)
- Mobile use of the eNet server with plug-in power supply (ref.-no. ST NT 12 VDC)
Product characteristics
- Internal eNet radio and WLAN antenna
- External eNet radio and WLAN antennas for extending the radio ranges can additionally be connected
- LEDs for signalling
- Buttons for construction site mode and restart of the eNet server
- Electrical separation between the connections of the external antennas and the Ethernet connection
- Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
Ordering Information
- Rail mounting device, 6 rail units
- including plug-in power supply (ref.-no. ST NT 12 VDC) for provisional operation at construction site
- New system feature: Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
Technical Details
Specification
Rated voltage: DC 12 V SELV
Current consumption: 400 mA
Power consumption
- Operation: max. 6 W
- Stand-by: max. 2 W
Ambient temperature: _5 ... +45 ¡C
Storage/transport temperature: _20 ... +70 ¡C
Relative humidity: 20 ... 70 % (no condensation)
Protection class: III
Mounting width: 108 mm (6 rail units)
Connection, power supply: terminal
LAN: RJ45 socket 8-pin
WLAN antenna, external: SMB connector
Bus line
- Cable length: max. 3 m
Number of RMD modules: max. 32
IP communication
- LAN: 10/100 Mbit/s Ethernet
- WLAN: 2.4 GHz, IEEE 802.11g
- IP connections: max. 8
eNet communication
- Radio frequency: 868.0 ... 868.6 MHz
- Transmission range in free field: typical 100 m
- Transmitting power: max. 20 mW
- Receiver category: 2
Properties
Properties
Technology | Enet |
Brand | JUNG |
Operating voltage | 12VDC |