Due to various circumstances outside our control, we are currently facing extended lead times on some products. 

Please be aware our daily cut-off to ship orders on a next-day service is now 1:45 pm. 

Our last shipping day of 2021 is December 23rd, we will resume shipping on January 4th.  

eNet radio switch/push-button actuator, 1-gang

eNet radio switch/push-button actuator, 1-gang

Product code: FMAS16REG
The eNet radio system closes the gap between conventional technology, in which devices are wired via a power cable, and networked building system technology. With the eNet Smart Home extension, switching and control of building services via smartphone, local or remote access is possible.
Price (Excluding VAT)


Intended use

  • Switching of lighting
  • Operation with suitable eNet radio transmitters
  • Operation with power supply (ref.-no. NT 1220 REG VDC) and receiver module (ref.-no. FM FK 32 REG) or eNet server
  • Installation in distribution boxes on DIN rail according to EN 60715

Product characteristics

  • Operating mode switch for: switch/push-button actuator or parameterisation via eNet server
  • Status feedback to radio transmitter
  • Scene operation possible
  • Switchable output with Prog button
  • Status indication with LED

Switching operation:

  • Switch-on telegram: Device switches on
  • Switch-off telegram: Device switches off

Push-button operation:

  • Relay contact remains closed as long as ON or OFF telegrams are being received
  • The maximum switch-on time is 60 seconds

Can be set with eNet server:

  • Flash function
  • Run-on time
  • Switch-on delay / switch-off delay
  • Operation as NO or NC contacts
  • Switch-off warning
  • Minimum switching repeat time
  • Operating locks
  • Continuous on, Continuous off
  • Supplementary functions with eNet server:

    • Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
    • Update of the device software
    • Reading of error memory

    Technical Details


    Rated voltage: AC 230 V ~, 50/60 Hz

    Ambient temperature: _5 ... +45 ¡C

    Switching current at AC 230 V ~

    • Ohmic: 16 A
    • For switching current > 10 A connecting cable 2.5 mm_
    • Fluorescent lamps: 4 AX

    Min. switching current AC: 100 mA

    Contact type: µ

    Stand-by power: max. 0.2 W

    Connected load

    • Incandescent lamps: 2300 W
    • HV halogen lamps: 2000 W
    • Electronic transformers: 1500 W
    • HV LED lamps: typical 500 W
    • Compact fluorescent lamps: typical 500 W
    • Inductive transformers: 1000 VA
    • Fluorescent lamps non-compensated: 920 VA
    • Capacitive load: 690 VA (560 µF)

    Connection, outputs

    • Connection mode: screw terminals
    • single wire: 1.5 ... 4 mm_
    • stranded without ferrule: 0.75 ... 4 mm_
    • stranded with ferrule: 0.5 ... 2.5 mm_

    Mounting width: 36 mm (2 rail units)

    Bus line

    • Rated voltage: DC 12 V SELV
    • Current consumption: max. 20 mA
    • Connection bus: terminal
    • Cable length: max. 3 m



    Technology eNet
    Brand JUNG
    Mounting DIN Rail
    Mounting Width 2MW

    Documents & Downloads

    Look for similar items