DCS Flush Mounted Switching Actuator
The switching actuator a zero-voltage switch contact (24 V SELV/ 50 µA to 1.6 A AC/DC) controlled via the 2-wire bus.
The switching actuator can be controlled via the buttons Door and Light on the home station, the floor-call button of the home station, the call button on the door station, the call button on the home station, the buttons of a telephone (in conjunction with the DCS-TC-gateway 1290 00, a zero-voltage button (in conjunction with the door communication 2-gang push button interface 1210 00.
The flush-mounted switching actuator can be used in four different operating modes:
- Switching, Timer/sec., Timer/min. and pulse
- pulse function for controlling existing automatic staircase mechanisms
- switching time can be adjusted from 1 s to 10 s or 1 min. to 10 min. depending on the function set
- LED display for programming, function selection and time setting.
The flush-mounted switching actuator is intended for installation in a deep flush-mounted wall box (depth 60 mm) behind a door-communication bus coupler.