KNX- MITSUBISHI ELECTRIC AC (15 Groups). City Multi with AG-150A, G-50A, GB-50A or GB-50ADA
This unit has been replaced by INKNXMUT015C000.
The G50 interface of IntesisBox
IntesisBox can talk to up to 2 Mitsubishi Electric G50s using XML protocol and offers the signals of all these City Multi groups through its KNX EIB interface, allowing up to 100 groups of air conditioners to be integrated into KNX. The AG-150A can be used with Expansions Cards as explained in the section IntesisBox capacity.
The KNX interface of IntesisBox
IntesisBox simulates a KNX device and acts as if it was one more device into the KNX system. The IntesisBox's KNX EIB interface connects directly to the EIB bus and is opto-isolated from the rest of the internal electronics.
The configuration of IntesisBox
IntesisBox KNX series are configured using LinkBoxEIB, a software tool for windowsTM which is supplied along with the purchase of IntesisBox with no additional cost. With the standard installation of LinkBoxEIB, a Demo project for integration of G50 devices is also installed, using this demo project makes the engineering needed for this integration easy and quick, almost plug&play.
This integration requires the Mitsubishi Electric City Multi AC system be equipped with the Mitsubishi Electric G-50A, GB-50A or AG-150A gateway which allows access to the signals of up to 50 groups of indoor units, no matter the number of outdoor units installed. In the G50, the group is the control unit, every group can have from 1 to 16 associated indoor units.
This G50 gateway is supplied by Mitsubishi Electric. Contact your nearest Mitsubishi Electric distributor for details.
- Operating Voltage: 9-30VDC/ 24VAC 50-60HZ
- Power Consumption: Max 1.4W
- Bus Voltage: KNX Bus 21...30VDC
- G50 Port: 1 x Ethernet 10Base-T (RJ45)
- Console Port: RS232. DB9 female connector (DCE).
- Configuration: Via Console Port and LinkBoxEIB Software
- Capacity: Basic version- one G50 and 15 City Multi groups