On the 20th of May our warehouse will be undertaking a stock take. 

We will not be able to dispatch on this day but are still able to accept orders as normal.

eNet radio switch/push-button actuator, 8-gang / blinds actuator, 4-gang
JUNG FM AS 816 REG

eNet radio switch/push-button actuator, 8-gang / blinds actuator, 4-gang

Product code: FMAS816REG
The eNet radio system closes the gap between conventional technology, in which devices are wired via a power cable, and networked building system technology. With the eNet Smart Home extension, switching and control of building services via smartphone, local or remote access is possible.
Price (Excluding VAT)
£327.47

Description

Intended use

  • Switching of lighting
  • Switching of single-phase fan motors
  • Controlling electrically driven blinds, shutters and awnings
  • Operation with suitable eNet radio transmitters
  • Operation with power supply (ref.-no. NT 1220 REG VDC) and receiver module (ref.-no. FM FK 32 REG) or eNet server
  • Installation in distribution boxes on DIN rail according to EN 60715

Product characteristics

  • Operating mode switch for switch-over of switch actuator, push-button actuator, blind actuator, shutter actuator or configuration via eNet server
  • Status feedback to radio transmitter
  • Scene operation possible
  • Outputs switchable with Prog button
  • Status indication of the outputs via LED

Switching operation:

  • Switch-on telegram: Device switches on
  • Switch-off telegram: Device switches off

Push-button operation:

  • Relay contact remains closed as long as ON or OFF telegrams are being received
  • The maximum switch-on time is 60 seconds

Operating mode "Venetian blind/Rolling shutter":

  • Positioning of the blind and slats via scene recall
  • Position for sun protection and twilight can be saved
  • Blind/shutter running time can be saved
  • Slat change-over time can be saved
  • Fabric-stretching for awnings

Can be set with eNet server in switching/push-button operation:

  • Operating mode for each output can be set separately
  • Flash function
  • Run-on time
  • Switch-on delay / switch-off delay
  • Operation as NO or NC contacts
  • Switch-off warning
  • Minimum switching repeat time
  • Operating locks
  • Continuous on, Continuous off

Can be set in the operating mode "Venetian blind/Rolling shutter" with eNet server:

  • Change-over time for direction change
  • Running direction invertible
  • Operating locks
  • Position for sun protection, twilight, lock-out protection and wind alarm

Supplementary functions with eNet server:

  • Fully-encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
  • Update of the device software
  • Reading of error memory

Technical Details

Specification

Rated voltage: AC 230 V ~, 50/60 Hz

Ambient temperature: _5 ... +45 ¡C

Switching voltage: AC 250 V ~

Minimum actuation time in operating mode

  • Blind: 0.1 s
  • Shutter: 0.3 s

Running time: 1 ... 600 s

Running time default setting: 120 s

Slat adjusting time: 0 ... 10 s

Switching current per output for AC 230 V ~

  • Ohmic: 16 A (AC1)
  • For switching current > 10 A connecting cable 2.5 mm_
  • Fluorescent lamps: 4 AX

Switching current neighbouring load outputs: _ 20 A

Current carrying capacity of device: max. 80 A

Min. switching current AC: 100 mA

Contact type: µ

Stand-by power: max. 0.5 W

Connected load per output:

  • Motors: 1000 W
  • Incandescent lamps: 2300 W
  • HV halogen lamps: 2000 W
  • Electronic transformers: 1500 W
  • Inductive transformers: 1000 VA
  • HV LED lamps: typical 500 W
  • Compact fluorescent lamps: typical 500 W
  • Fluorescent lamps non-compensated: 920 VA
  • Capacitive load: 690 VA (560 µF)

Connection, outputs

  • Connection mode: screw terminals
  • single wire: 1.5 ... 4 mm_
  • stranded without ferrule: 0.75 ... 4 mm_
  • stranded with ferrule: 0.5 ... 2.5 mm_

Mounting width: 72 mm (4 rail units)

Bus line

  • Rated voltage: DC 12 V SELV
  • Current consumption: 60 mA
  • Connection bus: terminal
  • Cable length: max. 3 m

Properties

Properties

Technology eNet
Brand JUNG
Mounting DIN Rail
Mounting Width 4MW

Documents & Downloads

Look for similar items

Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy