DINUY RE K5X LE1
1-channel LED lamps and R. L & C loads dimmer KNXRF
Product code: RE K5X LE1
1-channel KNX RF S-Mode wireless Dimming actuator. Perfect solution for using in conventional installations without placing KNX bus cables. Communication with the KNX Bus must be carried out using a KNX / KNX RF S-Mode media coupler.
- The Dimming Actuator has different functions which can be configured with ETS:
- Type of dimming: leading or trailing edge.
- Time of soft on and off.
- Maximum and minimum dimming level.
- Behaviour after on telegram.
- Allows saving a calling of up to 5 Scenes.
- Staircase time switch and Sequential operation modes.
- Possibility to configure the state in which it returns after a power fault.
- The connection of an auxiliary pushbutton (optional) allows local control of the actuator or some other wireless actuator or connected to the bus, as parameterised in the ETS.
- Programming and commissioning by ETS5.
- Bi-directional KNX-RF communication.
- It incorporates the KNX-RF signal repeater function (optional), which allows to extend the distance between transmitters and receivers.
Flush-mounting installation within junction box.
|Reference||RE K5X LE1|
|Power supply||230Vac 50/60Hz|
|Output Dimming Rating|
|Ð 230V Dimmable LED lamps by Leading-edge||4W ~ 100W|
|Ð 230V Dimmable LED lamps by Triling-edge||4W ~ 250W|
|Ð 12V Dimmable LED lamps with Electronic Transfo.||250W (of transformer)|
|Ð Incandescence & 230V Halogens||250W|
|Ð 12V Halogens lamps with Electronic Transfo.||250W|
|Ð 12V Halogens lamps with Inductive Transfo.||Does not admit|
|KNX Medium||KNX-RF 1.R|
|Transmission Power||< 10dBm|
|Range||In the Free Field: 100m // Indoors: 30m|
|Number of Outputs||1|
|Commissioning Mode||System Mode|
|Mounting||Flush-mounting within universal box|
|Dimensions||46 x 46 x 30mm|
|According to the Standards||EN60669-2-1|