MAXinBOX 16  V3. KNX multifunction actuator - 16 outputs 16A
Zoom f088bb68c4585fed2ff9ec03970eee307fd355241f33101dad7edd4f92b5fd6e

MAXinBOX 16 V3. KNX multifunction actuator - 16 outputs 16A

Product code: ZIOMB16V3
MAXinBOX 16 Plus is a multifunction actuator for DIN rails that offers multiple configurations of up to 8 shutter channels, up to 16 independent outputs of 16A (capacitive loads supported) and up to 4 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. It includes 20 independent logical functions.
Price (Excluding VAT)
checking stock


  • 4 different configurable blocks:
    • Shutter channels (up to 8).
    • Individual outputs (up to 16).
    • 2-pipe fan coil control (up to 4 units).

  • Manual output operation with push button and LED status indicator.
  • Suitable for capacitive loads, maximum 140 µF.
  • Logical functions included.
  • Output timing facilities.
  • Total data saving on power failure.
  • Size 90 x 60 x 140 mm (8 DIN units).
  • DIN rail unit assembly (EN 50022), with snap fit clamp.
  • No external power supply required other than the bus.
  • KNX BCU integrated.
  • Possibility to connect different phases in adjoining outputs.
  • CE directives compliant

Technical Details


General System Specifications

  • KNX Power Supply: 29VDC
  • KNX Current Consumption: 11mA @ 29VDC
  • Operating temperature: 0 °C to 55 °C
  • Assembly: Independent control assembly device to be mounted inside of electrical panels with DIN rail (EN 50022).
  • Response to Bus Voltage Failure: Data saving and relay status change according to parameterization.
  • Response to bus failure recovery: Data recovering and output status change according to parameterization 
  • Operation indication:  Programming LED indicates programming mode (red) and test mode (green). Output status LED indicators reflect current output state.


  • Contact type: Potential free outputs through bistable relays with tungsten pre-contact.
  • Disconnection type: Micro-disconnection
  • Rated current by output: 16(6)A * 250V AC (4000 VA) 16(6)A * 30V DC (480W)
  • Number of outputs per common: 1 shutter channel
  • Different phases connection:  Possibility to connect different phases in adjoining shutter channel outputs 
  • Max Current per Block: 40A
  • Max Power - Resistive Load:  4000W
  • Max Power - Inductive Load: 1500VA
  • Connection type: Cable screw terminal
  • Recommended Cable Section: 0.25 mm to 4 mm 
  • Cable Type: Stranded or Solid Wire
  • Maximum Response Time:  50ms
  • Expected Life - Mechanical: 3 million operations (60cpm)
  • Expected Life - Electrical: 100.000 cycles (6cpm with resistive load)



Technology KNX
Mounting DIN Rail
Operating voltage KNX Bus (29VDC)
Outputs 16
IP rating IP20
Mounting Width 8MW

Look for similar items