Product Guide

GIRA KNX Keypads


Gira Keypad

The Gira range of keypads are very functional with a wide range of features and finishes. This is achieved by being made up of the following components:


  • System 55 requires 4 separate components:
    • Bus Coupler Unit (BCU)
    • Electronics
    • Rocker Cover
    • Frame
  • F100 requires 3 components:
    • BCU
    • Electronics with rocker cover
    • Frame


Bus Coupler Units

All units work with the standard BCU 200800

The BCU 200900 is for use with the Plus range to read a local temperature such as the floor. The Gira temperature probe 1493 00 must be used. It cannot be used with the Basic or Comfort ranges.

Electronics

The Gira range of KNX keypads has three tiers of functionality; Basic, Comfort and Plus.


Basic

This is the lowest price range and the buttons only work as rockers, which means no one-touch switching or dimming. Scenes can be triggered from each side but this is a key limitation in functionality and the specification of this range needs to be considered carefully.

Electronics for Standard 55 and E22:

  • 1 Gang - 5111 00
  • 3 Gang - 5113 00
  • 2 Gang (1+1) - 5112 00

Electronics + Cover for F100:

  • 1 Gang - 2021 111 / 2021 112
  • 2 Gang - 2022 111 / 2022 112
  • 3 Gang - 2023 111 / 2023 112


Comfort

This is the standard range of keypads and each rocker can be configured as buttons with full functionality. All units have a built in temperature sensor.

Electronics for Standard 55 and E22: 

  • 1 Gang - 5131 00
  • 3 Gang - 5133 00
  • 2 Gang (1+1) - 5132 00
  • 4 Gang (1+3) - 5134 00
  • 6 Gang (3+3) - 5136 00

Electronics + cover for F100:

  • 1 Gang - 2031 111 / 2031 112
  • 2 Gang - 2032 111 / 2032 112
  • 3 Gang - 2033 111 / 2033 112
  • 4 Gang - 2034 111 / 2034 112
  • 4 Gang (2+2) - 2035 111 / 2035 112


Plus

This range has an integrated Room Temperature Controller (RTC). The top row is taken by the RTC with the buttons being used to change the set point or mode. The temperature used for regulation can be taken from; the on-board temperature sensor, an external probe (when using the Bus Coupler- 200900) or a received temperature value from the bus.

Electronics for Standard 55 and E22:

  • 2 Gang + RTC - 5142 00
  • 5 Gang + RTC - 5145 00

Electronics + cover for F100:

  • 2 Gang + RTC - 2042 111 / 2042 112
  • 3 Gang + RTC (1+2) - 2043 111 / 2043 112
  • 6 Gang + RTC (2+4) - 2046 111 / 2046 112
Rocker Covers

For the Standard 55 and E22 ranges the rocker covers are ordered separately and these can be engraved by creating a design at www.marking.gira.com. The reference code will need to be submitted when placing the order. The cost of inscription is included in the product cost.

All of the above products can be found here.